光伏發電是利用半導體界面的光生伏特效應而將光能直接轉變?yōu)殡娔艿囊环N技術。這種技術的關鍵元件是太陽能電池。太陽能電池經過串聯后進行封裝保護可形成大面積的太陽電池組件，再配合上功率控制器等部件就形成了光伏發電裝置。光伏發電的優點是較少受地域限制，因為陽光普照大地;光伏系統還具有安全可靠、無噪聲、低污染、無需消耗燃料和架設輸電線路即可就地發電供電及建設同期短的優點。

并網光伏發電就是太陽能組件產生的直流電經過并網逆變器轉換成符合市電電網要求的交流電這后直接接入公共電網。并網光伏發電有集中式大型并網光伏電站一般都是國家級電站，主要特點是將所發電能直接輸送到電網，由電網統一調配向用戶供電。但這種電站投資大、建設周期長、占地面積大，目前還沒有太大發展。而分散式小型并網光伏，特別是光伏建筑一體化光伏發電，由于投資小、建設快、占地面積小、政策支持力度大等優點，是目前并網光伏發電的主流。

戶用式太陽能發電系統

二、光伏發電的原理

光伏發電，其基本原理就是“光伏效應”。光子照射到金屬上時，它的能量可以被金屬中某個電子全部吸收，電子吸收的能量足夠大，能克服金屬內部引力做功，離開金屬表面逃逸出來，成為光電子。

白天采用高能vcz晶體發電板和太陽光互感對接和全天候24小時接收風能發電互補，通過全自動接收轉換柜接收，直接滿足所有家電用電需求。并通過國家信息產業化學物理電源產品質量監督檢驗中心檢測合格。

光照使不均勻半導體或半導體與金屬結合的不同部位之間產生電位差的現象。它首先是由光子(光波)轉化為電子、光能量轉化為電能量的過程;其次，是形成電壓過程。有了電壓，就像筑高了大壩，如果兩者之間連通，就會形成電流的回路。

光伏發電的主要原理是半導體的光電效應。硅原子有4個外層電子，如果在純硅中摻入有5個外層電子的原子如磷原子，就成為N型半導體；若在純硅中摻入有3個外層電子的原子如硼原子，形成P型半導體。當P型和N型結合在一起時，接觸面就會形成電勢差，成為太陽能電池。當太陽光照射到P－N結后，空穴由P極區往N極區移動，電子由N極區向P極區移動，形成電流。

多晶硅經過鑄錠、破錠、切片等程序后，制作成待加工的硅片。在硅片上摻雜和擴散微量的硼、磷等，就形成P－N結。然后采用絲網印刷，將精配好的銀漿印在硅片上做成柵線，經過燒結，同時制成背電極，并在有柵線的面涂一層防反射涂層，電池片就至此制成。電池片排列組合成電池組件，就組成了大的電路板。一般在組件四周包鋁框，正面覆蓋玻璃，反面安裝電極。有了電池組件和其他輔助設備，就可以組成發電系統。為了將直流電轉化交流電，需要安裝電流轉換器。發電后可用蓄電池存儲，也可輸入公共電網。發電系統成本中，電池組件約占50%，電流轉換器、安裝費、其他輔助部件以及其他費用占另外 50%。

三、光伏電站的類型

光伏發電系統分為獨立光伏發電系統、并網型光伏發電系統及分布式光伏發電 系統。

1、獨立光伏發電也叫離網光伏發電。主要由太陽能電池組件、控制器、蓄電池組成，若要為交流負載供電，還需要配置交流逆變器。獨立光伏電站包括邊遠地區的村莊供電系統，太陽能戶用電源系統 ，通信信號電源、陰極保護、太陽能路燈等各種帶有蓄電池的可以獨立運行的光伏發電系統。

2、并網光伏發電就是太陽能組件產生的直流電經過并網逆變器轉換成符合市電電網要求的交流電之后直接接入公共電網。

可以分為帶蓄電池的和不帶蓄電池的并網發電系統。帶有蓄電池的并網發電系統具有可調度性，可以根據需要并入或退出電網，還具有備用電源的功能，當電網因故停電時可緊急供電。帶有蓄電池的光伏并網發電系統常常安裝在居民建筑；不帶蓄電池的并網發電系統不具備可調度性和備用電源的功能，一般安裝在較大型的系統上。并網光伏發電有集中式大型并網光伏電站一般都是國家級電站，主要特點是將所發電能直接輸送到電網，由電網統一調配向用戶供電。但這種電站投資大、建設周期長、占地面積大，還沒有太大發展。而分散式小型并網光伏，特別是光伏建筑一體化光伏發電，由于投資小、建設快、占地面積小、政策支持力度大等優點，是并網光伏發電的主流。

3、分布式光伏發電系統，又稱分散式發電或分布式供能，是指在用戶現場或靠近用電現場配置較小的光伏發電供電系統，以滿足特定用戶的需求，支持現存配電網的經濟運行，或者同時滿足這兩個方面的要求。　　分布式光伏發電系統的基本設備包括光伏電池組件、光伏方陣支架、直流匯流箱 、直流配電柜、并網逆變器、交流配電柜等設備，另外還有供電系統監控裝置和環境監測裝置。其運行模式是在有太陽輻射的條件下，光伏發電系統的太陽能電池組件陣列將太陽能轉換輸出的電能，經過直流匯流箱集中送入直流配電柜，由并網逆變器逆變成交流電供給建筑自身負載，多余或不足的電力通過聯接電網來調節。

Photovoltaic power generation is a technology that directly converts light energy into electricity by using the photogenerated volt effect of semiconductor interface.   The key element in this technology is the solar cell.  Solar cells after series packaging protection can form a large area of solar cell components, and then with the power controller and other components to form a photovoltaic power generation device.  Photovoltaics have the advantage of being less localised, since the sun shines; The photovoltaic system also has the advantages of safety and reliability, no noise, low pollution, no need to consume fuel and set up transmission lines to generate electricity and supply power locally, and the construction period is short.  

Grid-connected photovoltaic power generation means that the direct current generated by solar modules is converted into alternating current that meets the requirements of the mains power grid through grid-connected inverter and then directly connected to the public power grid.   Grid-connected photovoltaic power generation centralized large-scale grid-connected photovoltaic power stations are generally national-level power stations, the main feature of which is that the generated energy is directly transmitted to the power grid, and the power grid is unified to supply power to users.  However, this kind of power station has not been developed much because of its large investment, long construction cycle and large area.  And the distributed small-scale grid-connected photovoltaic, especially the integrated photovoltaic power generation of photovoltaic buildings, is the mainstream of grid-connected photovoltaic power generation due to the advantages of small investment, fast construction, small footprint, and large policy support.  

Image of household solar power system  

The principle of photovoltaic power generation  

Photovoltaic power generation, its basic principle is the "photovoltaic effect".  When a photon strikes a metal, its energy can be completely absorbed by an electron in the metal. The energy absorbed by the electron is large enough to overcome the metal's internal gravity to do work, leave the metal surface and escape, becoming a photoelectron.  

During the day, it adopts high-energy VCZ crystal power generation panel and solar light mutual induction docking and round-the-clock wind power generation complementarity. It can directly meet the electricity demand of all household appliances through automatic receiving and conversion cabinet.   And passed the national information industry chemical physical power supply product quality supervision and inspection center test qualified.  

An electric potential difference caused by light exposure in an inhomogeneous semiconductor or between different parts of a semiconductor bound to a metal.   It is first from the photon (light wave) into electrons, light energy into electric energy process;  Second, is the formation of voltage process.  With voltage, it's like building a dam, and if the two are connected, it creates a loop of current.  

The main principle of photovoltaic power generation is the photoelectric effect of semiconductors.  Silicon atoms have four outer electrons. If pure silicon is mixed with an atom with five outer electrons, such as phosphorus, it becomes an N-type semiconductor.  If pure silicon is mixed with atoms with three outer electrons, such as boron atoms, P-type semiconductors are formed.  When the P-type and N-type are combined, the contact surface will form a potential difference and become a solar cell.  When sunlight hits the P-N junction, holes move from the P-pole region to the N-pole region, and electrons move from the N-pole region to the P-pole region, forming an electric current.  The picture  

The polysilicon is made into silicon wafers to be processed after ingot casting, ingot breaking, slice and other procedures.  The P-N junction is formed by doping and diffusing trace amounts of boron and phosphorus on the silicon wafer.  Then using screen printing, the fine silver paste is printed on a silicon wafer to make a grid line. After sintering, the back electrode is made at the same time, and the surface of the grid line is coated with a layer of anti-reflection coating, and the cell sheet is made.  The cells are arranged and combined into battery components to form large circuit boards.   Generally, the components are surrounded by aluminum frames, the front side is covered with glass, and the opposite side is installed with electrodes.  With battery modules and other auxiliary equipment, a power generation system can be formed.  In order to convert direct current to alternating current, a current converter is required.  After generating electricity, it can be stored by battery or input into public power grid.  Battery components account for about 50 percent of the cost of a generation system, and current converters, installation, other ancillary components and other expenses account for another 50 percent.  

3. Types of photovoltaic power stations  

Photovoltaic power generation system is divided into independent photovoltaic power generation system, grid-connected photovoltaic power generation system and distributed photovoltaic power generation system.  

1. Independent photovoltaic power generation is also called off-grid photovoltaic power generation.  It is mainly composed of solar cell modules, controllers, and batteries. To power AC loads, an AC inverter is also required.  Independent photovoltaic power station includes village power supply system in remote areas, solar household power supply system, communication signal power supply, cathodic protection, solar street lamp and other photovoltaic power generation systems with batteries that can operate independently.  

The picture  

2. Grid-connected photovoltaic power generation refers to the direct current generated by solar modules that is converted into alternating current that meets the requirements of the mains power grid by grid-connected inverter and then directly connected to the public power grid.  

It can be divided into grid-connected power generation systems with and without batteries.  The grid-connected power generation system with battery is dispatchable and can be incorporated into or withdrawn from the power grid as required. It also has the function of backup power supply, which can provide emergency power when the power grid fails for some reason.  Grid-connected photovoltaic power systems with batteries are often installed in residential buildings;   Grid-connected power generation systems without batteries do not have the functions of schedulability and backup power supply, and are generally installed in larger systems.  Grid-connected photovoltaic power generation centralized large-scale grid-connected photovoltaic power stations are generally national-level power stations, the main feature of which is that the generated energy is directly transmitted to the power grid, and the power grid is unified to supply power to users.  However, this kind of power station has not been developed much because of its large investment, long construction cycle and large area.  And the distributed small-scale grid-connected photovoltaic, especially the integrated photovoltaic power generation of photovoltaic buildings, is the mainstream of grid-connected photovoltaic power generation due to the advantages of small investment, fast construction, small footprint, and large policy support.  

The picture  

3. Distributed photovoltaic power generation system, also known as distributed power generation or distributed energy supply, refers to the configuration of small photovoltaic power supply system at or near the user site to meet the needs of specific users, support the economic operation of the existing distribution network, or meet the requirements of the two aspects at the same time.   The basic equipment of the distributed photovoltaic power generation system includes photovoltaic cell modules, photovoltaic square support, DC bus box, DC power distribution cabinet, grid-connected inverter, AC power distribution cabinet and other equipment. In addition, there are power supply system monitoring devices and environmental monitoring devices.   Its operation mode is in the solar radiation conditions, photovoltaic power generation system of solar cell module array to convert solar energy output power, a dc bus concentrated into dc power distribution cabinet, by the grid inverter inverter into alternating current supply of building their own load, excess or shortage of electricity through the grid to adjust.