02

太陽能光伏板的安裝區域

03

太陽能光伏板電池的安裝

將電池組安裝在支架上時，通常會使用彈簧和平墊墊片，固定效果會比較好。而且太陽能電板要與向陽位置呈現大約30度左右的角，并且根據現場環境，對太陽能電池進行接線，確保使用更長久。

太陽能電池組在進行連接的過程中，要將其與接線盒內的正極、負極正確的連接在一起，盡量不可出現短接的現象。而且在接頭、絕緣頭之間，不可存在縫隙，否則容易出現火花，帶來麻煩。

04

太陽能光伏板的清潔方法

對于太陽能光伏板中，其吊裝結構是要穩定，不可有松動的現象。在使用的時間久了，會導致其表面出現較多的灰塵，這時需使用軟棉布進行擦拭，但不可觸摸接頭位置，要是發現問題，需聯系專業人員機進行處理，千萬不要自己動手。

Solar photovoltaic (PV) system is a facility that converts solar energy into direct current (DC) energy by using photovoltaic (PV) semiconductor materials.   At the heart of a photovoltaic facility are solar panels.  Solar photovoltaic panels are of great significance to people's lives, so pay attention to the use of solar photovoltaic panels, then what matters to pay attention to the installation of solar photovoltaic panels, let us to see  

01  

Solar photovoltaic panel a group of how many pieces  

It is generally a group of about 20 pieces, and the specific load and model of the inverter.  Solar photovoltaic panels are made of high-grade chips. The attention component of the device is solar panels, which can absorb solar energy during the day and convert it into electricity, so as to meet the needs of people's life.  

02  

The installation area of solar photovoltaic panels  

When installing solar cells, choose the right installation area, try not to choose places where the light is easily blocked, and do not close to flammable and explosive items.   Moreover, the structure used when assembling the battery should be able to adapt to the surrounding environment and have certain anti-corrosion measures.  

03  

Installation of solar photovoltaic panel cells  

When mounting a battery pack on a stand, springs and flat washers are usually used to secure the pack.  Moreover, the solar panel should be at an Angle of about 30 degrees with the sunward position, and the solar cell should be wired according to the field environment to ensure a longer use.  

In the process of connection, the solar cell group should be correctly connected with the positive and negative poles in the junction box, and the phenomenon of short connection should not occur as far as possible.   And in the joint, insulation between the head, there can be no gap, otherwise prone to spark, bring trouble.  

04  

Cleaning methods of solar photovoltaic panels  

For solar photovoltaic panels, the hoisting structure should be stable and not loose.  In use for a long time, will lead to more dust on the surface, then need to use soft cotton cloth to wipe, but do not touch the joint position, if found a problem, need to contact professional machine to deal with, do not do it yourself.