光伏整縣推進參考資料：工商業光伏開發全流程
整縣推進工作如火如荼，小盒子給大家找到了一份關于工商業光伏開發全流程的資料，供大家參考學習。
01前期開發階段：1 ）尋找項目資源；2） 業主初步溝通；3 ）前期資料收集；4） 現場踏勘;5 )技術方案測算;6) 確定開發意向;7) 簽訂相關協議;
1尋找項目資源,可被開發的光伏項目資源,工業園區/開發區,商業區,大型工礦企業,國家級高新技術產業園,地方高新技術產業園,物流園,保稅區經濟開發區,污水處理廠等工業廠房,賓館飯店,寫字樓,體育場館,
機場,火車站,大型商業中心,商超等商業設施,分布式光伏開發應遵循,“因地制宜、清潔高效、分散布局、就近利用”的原則.
2初步溝通,與廠區業主建立聯系，針對廠區情況、屋頂結構、用電水平等基本問題進行訪談，確定合作意愿和用能需求。過資料與衛星圖，考察了以下幾方面，判斷項目的可行性。?考察企業屬性（國有企業、上市企業、知名外企）、資信是否良好、經營狀況及收入是否穩定、無不良記錄。?考察建筑物產權是否獨立清晰（房產證、土地證、建設規劃許可證原件），房屋產權是否質押。?考察屋面結構（混凝土、彩鋼瓦）、屋頂使用年限和面積（至少2萬平米以上）。?考察用電特性、分時用電電量、用電電價、電壓等級、變壓器容量。?考察屋頂周圍是否有遮擋或有高樓建設規劃、建筑物周邊是否有氣體或固體污染物排放。?考察業主的合作意愿，初步溝通合作模式（自發自用、余電上網）。
3前期資料收集清單:建筑物業主的營業執照;擬建光伏廠房房產證;擬建光伏廠房土地證;擬建光伏廠房建設規劃許可證,屋頂已使用年限,彩鋼瓦鋪設時間,彩鋼瓦厚,彩鋼瓦類型 ,彩鋼瓦顏色;
用電情況:電費結算單(最近連續至少12個月的電費清單)
4現場實地踏勘:完成項目初步評估后，EPC團隊對目標企業進行了拜訪踏勘。利用無人機航拍建模，對比建筑圖紙與實際是否一致，還對廠房的內部結構和屋頂情況進行復核和拍照。
屋頂現有設施情況:商業區,屋頂障礙物：氣樓、采光帶、女兒墻等。周圍遮擋物：屋頂周圍是否有遮擋有高樓建設規劃。配電柜、一二次倉、箱變等安裝: 位置，業主同意后，在總平圖中標出位置。
確定電纜敷設路徑，并在總平圖中標出位置。
光伏接入系統方面,其他方面,并網點位置、電壓等級、變壓器容量、斷路器品牌及大小、進出線開關柜品牌及型號、無功補償容量及情況。
廠房內物品類型，貴重程度如何。是否有清洗光伏系統的水源點。
5技術方案測算:評估企業整體運營情況，及確定采用的合作模式。
項目評估的重點:建筑產權,及使用權,
? 建筑物屋頂產權清晰;? 所有權方及使用權方是否一致認可項目建設 ;? 業主方能否為項目提供相應的便利條件 ;? 建筑屋頂所有權年限及壽命大于25年;
建筑物結構形式:? 委托原屋頂設計單位或第三方機構進行屋頂荷載計算，并出具滿足光伏安裝條件的證明;? 建筑結構能否加固，評估加固的難度及成本;
屋面(防水處理)
? 屋面防水形式及老化程度? 評估防水修復的難度及成本
項目投資(經濟性)
? 項目合作模式,? 項目經濟性是否可行
其他事項? 分布式光伏的接入距離;? 現場施工難易難度等;
6 確立開發意向,與企業業主積極溝通，簽訂協議，進入項目備案階段。
02項目備案階段
1)發改委項目備案;:獲得縣、區發改委項目備案
分布式電源項目申請表或項目申請報告,包含項目實施地點、投資資金來源、收益情況簡單說明、業主情況等。
企業投資項目:備案表,公司資料、企業法人營業執照等,固定資產投資,項目節能登記表_
項目投資資料 ：屋頂（建筑物）產權證明、業主授權材料（例如 屋頂租賃合同）、售電協議等，屋頂（建筑物）材料，屋頂平面圖、屋頂安全承載能力證明材料（由資質的設計單位出具）等。

2電網公司接入批復：獲得縣、區電網公司接入批復
資料名稱，分布式電源項目申請表，包含項目實施地點、投資資金來源、收益情況簡單 說明、業主情況等，
企業資料：經辦人身份證及復印件、法人委托書原件、企業法人營業執照等，發電項目前期資料，房產證或土地證、屋頂租賃協議、售電協議、屋頂抗壓及屋頂面積可行性證明、資金證明等。
發改委備案批復文件：用戶電網相關資料及系統接入報告；
供電局受理并網申請：免費制定接入方案，出局接網意見函。
主要電氣設備一覽表：及主要設備技術參數和型式認證報告；包括：光伏組件、逆變器、變壓器等設備（并網設備選型應符合國家安全、節能、環保要求）。
03設計施工階段：拿到備案與接入批復后，EPC與企業確定設計方案，項目順利進場開工，施工圖設計，建設實施（1.現場測繪、地勘、勘界、提出設計要求;2.接入系統報告編制并上會評審出施工圖、藍圖;3.各專業進行圖紙繪制（結構、土建、電氣等）;4.現場技術交流;5.送出線路初設可研評審上會， 出具電網接入意見;6.設備采購;7.光伏系統建設工作;8.所有設備電氣連接及保護調試、監控安裝等9.并網前單位工程調試報告/記錄發電系統無力試運行;10,.網前單位工程驗收報告/記錄
04并網驗收階段
工商業光伏項目一般分為3個階段，第1階段進行項目評估與合同簽訂，第2階段辦理備案與接入手續，第3階段建設并網。
01.項目業主向電網公司提出并網驗收和調試申請
02.電網公司受理并網驗收和調試申請
03.與電網簽訂購售電合同和并網調度協議
04.安裝關口電能計量裝置
05.完成并網驗收及調試
06.項目并網運行

Photovoltaic county to promote reference materials: industrial and commercial photovoltaic development process

The whole county to promote the work in full swing, small box to everyone to find a full process of industrial and commercial photovoltaic development information for your reference.

01 Early development stage: 1) Looking for project resources;2) Initial communication with the owner; 3) Early data collection;4) Site survey;5) Technical scheme calculation; 6) Determine the development intention;7) Sign relevant agreements;

1. Look for project resources, photovoltaic project resources that can be developed, industrial parks/development zones, business districts, large industrial and mining enterprises, national high-tech industrial parks, local high-tech industrial parks, logistics parks, bonded economic development zones, sewage treatment plants and other industrial plants, hotels, restaurants, office buildings, sports venues,

The development of commercial facilities such as airports, railway stations, large commercial centers and super stores should follow the principle of "adapting measures to local conditions, clean and efficient, scattered layout and nearby utilization".

2. Conduct preliminary communication, establish contact with factory owners, conduct interviews on factory conditions, roof structure, electricity consumption level and other basic issues, and determine cooperation intention and energy demand. Through the data and satellite images, the following aspects were investigated to judge the feasibility of the project.? Inspect enterprise attributes (state-owned enterprises, listed enterprises, well-known foreign enterprises), good credit, stable operating conditions and income, and no bad records. ? Inspect whether the property rights of the building are independent and clear (real estate certificate, land certificate, original construction planning permit), and whether the property rights of the building are pledged. ? Inspect roof structure (concrete, colored steel tile), roof service life and area (at least 20,000 square meters).? Inspect power consumption characteristics, time-sharing electricity quantity, electricity price, voltage grade and transformer capacity. ? Check whether there is shelter around the roof or high-rise construction plans, and whether there are gas or solid pollutant emissions around the building.? Inspect the cooperative intention of the owner, and communicate the cooperation mode preliminally (self-use, surplus electricity online).

3. Preliminary data collection list: business license of building owner;Property certificate of proposed PHOTOVOLTAIC workshop; Land certificate for the proposed PHOTOVOLTAIC workshop;Proposed photovoltaic plant construction planning permit, the roof has been used for life, color steel tile laying time, color steel tile thickness, color steel tile type, color steel tile color;

Electricity usage: Electricity statement (electricity bills for at least 12 consecutive months)

4. Site visit: after the completion of the preliminary assessment of the project, the EPC team visited the target enterprise. Uav aerial modeling was used to compare whether the architectural drawings were consistent with the actual situation, and the internal structure and roof of the workshop were reviewed and photographed.

Existing roof facilities: business district, roof barriers: air tower, lighting belt, parapet, etc.Surrounding shelter: Whether there is shelter around the roof and high-rise construction planning. Installation of power distribution cabinet, primary and secondary warehouse, box transformer, etc. : location, with the consent of the owner, the location shall be marked on the general drawing.

Determine cable routing and mark the location on the general drawing.

Photovoltaic access system, other aspects, and network location, voltage level, transformer capacity, circuit breaker brand and size, incoming and outgoing switch cabinet brand and model, reactive power compensation capacity and situation.

The type and value of articles in the factory.Is there a water source for cleaning the PV system?

5. Calculation of technical scheme: evaluate the overall operation of the enterprise and determine the cooperation mode to be adopted.

Key points of project evaluation: building property rights and use rights,

? Clear ownership of the building roof;? Whether the owner and the user agree to the project construction; ? Whether the owner can provide appropriate convenience for the project;? The ownership life and life of the roof of the building is greater than 25 years;

Building structure :? Entrust the original roof design unit or a third party organization to calculate the roof load, and issue a certificate meeting the photovoltaic installation conditions; ? Whether the building structure can be strengthened, and assess the difficulty and cost of strengthening;

Roofing (waterproof treatment)

? Form of roof waterproofing and degree of aging ? Assess the difficulty and cost of waterproofing repair

Project investment (economy)

? Project cooperation mode; ? Whether the project is economically feasible

? Access distance of distributed pv;? The difficulty of site construction;

6. Establish the development intention, actively communicate with the enterprise owner, sign an agreement, and enter the project record stage.

02 Project filing stage

1) Project filing by NDRC;: Obtained the project record of county and district Development and Reform Commission

Distributed power supply project application form or project application report, including project implementation place, source of investment funds, brief description of income, owner information, etc.

Enterprise investment items: record form, company information, business license of enterprise legal person, fixed assets investment, project energy saving registration form

Project investment materials: roof (building) property rights certificate, owner authorization materials (such as roof lease contract), electricity sales agreement, roof (building) materials, roof plan, roof safety bearing capacity certification materials (issued by qualified design units), etc.

Access approval from power grid companies: Access approval from county and district power grid companies is obtained

Name of materials, application form of distributed power supply project, including project implementation place, source of investment funds, brief description of income, owner information, etc.

Enterprise information: id card and copy of the operator, original power of attorney of legal person, business license of enterprise legal person, etc., pre-project information of power generation project, property ownership certificate or land certificate, roof lease agreement, electricity sales agreement, roof pressure and roof area feasibility certificate, capital certificate, etc.

Approval documents of NDRC for record: user power grid related information and system access report;

The power supply bureau accepts the application for network connection: free of charge to formulate access scheme, outgoing access letter.

List of main electrical equipment: and main equipment technical parameters and type certification report;Including: photovoltaic modules, inverters, transformers and other equipment (the selection of grid-connected equipment should meet the requirements of national security, energy saving and environmental protection).

03 Design and construction stage: after receiving the record and access approval, EPC and the enterprise shall determine the design scheme, and the project shall enter the site and start work smoothly. Construction drawing design and construction implementation (1). Site surveying and mapping, geological prospecting, demarcation and putting forward design requirements;2. Prepare access system reports and review construction drawings and blueprints; 3. Drawing of various majors (structure, civil engineering, electrical, etc.);4. On-site technical communication; 5. Opinions on power grid access will be issued on the preliminary feasibility study review of the outgoing lines;6. Equipment procurement; 7. Photovoltaic system construction;Electrical connection, protection, debugging, monitoring and installation of all equipment 9. Commissioning report/record of unit project before grid connection; 10. Pre-network unit project acceptance report/record

04 Grid connection acceptance Stage

Industrial and commercial photovoltaic projects are generally divided into three stages. The first stage is for project evaluation and contract signing, the second stage is for filing and access procedures, and the third stage is for grid connection.

01. The project owner applies for grid-connection acceptance and commissioning to the power grid company

02. The power grid company shall accept the application for grid connection acceptance and commissioning

03. Sign power purchase and sale contract and grid connection scheduling agreement with power grid

04. Install power metering devices at gateways

05. Complete grid connection acceptance and debugging

06. The project is connected to the network